Name: Low Vibration thrust roller bearing

Brief introduction

Thrust roller bearings are separable bearings, can only withstand axial load and a slight impact, to limit the shaft (or shell) of the axial displacement in one direction, it can be used as single-axis to the position. But its carrying capacity is far greater than the thrust ball bearings.

The single direction thrust ball bearing consist of a shaft washer, a housing washer and a ball and cage thrust assembly.

The bearings are separable so that mounting is simple as the washers and the ball and cage assembly can be mounted separately.

The types: bearings with a flat seat surface on the housing washer, bearings with a sphered seat surface and bearings with a 

sphered housing washer can be used together with a sphered seat washer

This type bearing can accommodate axial loads in one direction and thuslocate a shaft axially in one direction. They must not be subjected to any radial load.

Thrust Roller Bearings are used for axles of axial load and radial joint load, but the radial load shall not exceed 55% of axial load. Compared with other thrust roller bearings, such bears are provided with lower friction coefficient, higher speed and self-aligning properties.The

 rollers of these bearings are of spherical shape, and the spherical raceway surface of the housing washer is self aligned.